bahasa inggris kelas XII

Change RAM in Notebook HP

PURPOSE         : To change RAM the agreement with procedures that have been determined

SCOPE             : To only RAM in Notebook HP

KEYWORDS     : RAM,Notebook HP,Change

INSTRUCTIONS  :

1.      Open the hood casing cover RAM.

2.      Press the right and left lock RAM direction out.

3.      Once a key is pressed out, then it will rise above the RAM position and tilt.

4.      Withdraw its RAM.

5.      Replace the RAM in slots of RAM available to the state oblique (last time took the position of RAM)

6.      Make sure the RAM is fitted and fixed into the RAM slots

7.      Now  press down the RAM (as previously locked RAM position) until it clicks.

8.      Once installed, please close the RAM as before. And stay turn on the laptop as usual, due to the addition or replacement of RAM does not need any installation

9.        RAM 1 GB previously only been increased to 3 GB ..

MONITORING   :

                When we do the replacement RAM in our HP Notebook supervised by  SRIYOKO S.KOM

Father as a mentor who has understood and understands the steps of RAM in a Notebook replacement.

CORRECTIVE ACTION :

·         Crash After Installing New RAM
The fix:
- The possibility that you plug the ram is not compatible with your computer (unplug the ram)

·         Adding RAM But Not Detected

       The fix:
      - Make checks such as the previous case
      - Ensure appropriate slot yan used, for example: SD RAM has a slot similar to RAM but RD   RD RAM, can not be detected even though could be mounted on the type of SD RAM slot.

VERIFICATION and RECORD KEEPING :

                This report is made on 27 january 2014, 08:00 to 9:15 hours
              This statement applies to two months.